Turin Gallatin V HX Espresso Machine with PID - Dual Boiler, E61 Group, Rotary Pump, Commercial Grade, Heat Exchanger, Prosumer Espresso Maker

Product Overview

The Turin Gallatin V HX (model G3035) is built around a 2-liter heat exchanger boiler that allows simultaneous brewing and steaming. This is a key advantage for milk-based drinks, as you can steam milk while pulling a shot without waiting for the boiler to recover temperature. The E61 grouphead uses a thermosiphon loop to maintain stable water temperature, which is further refined by PID control that lets you adjust the brew temperature in precise increments. The machine measures 17.44 inches deep, 11.26 inches wide, and 15.55 inches tall, and weighs 53.5 pounds — so it requires dedicated counter space. Included accessories are a 58mm portafilter with single and double baskets, a walnut-handled tamper, and a steam wand with a 3-hole tip. The digital display allows adjustment of preinfusion time, boiler temperature, and standby/eco mode timers. One notable feature is the ability to switch between the 1.7-liter water tank or direct connection to a water line, though the manufacturer recommends occasional direct-connect use to avoid pump wear. The joystick controls and black walnut handles add a premium aesthetic. The machine is not smart-home compatible.

Build & Materials

The Turin Gallatin V HX has a stainless steel body with a mirror finish that resists fingerprints and wipes clean easily. The machine is substantial at 53.5 pounds, suggesting heavy-duty internal components. The black walnut handle accents on the joysticks, portafilter, and tamper provide a tactile contrast to the steel. The layout places the brew group in the center, with a steam wand on the right and a hot water wand on the left. The joysticks for steam and water are ergonomically angled and lock into place. The drip tray is removable and deep enough for moderate use. The 1.7-liter water tank sits at the back and is accessible from the top. For direct-connect plumbing, a manual valve switches between tank and line.

The machine measures 17.44 inches deep and 11.26 inches wide, so it needs at least 18 inches of counter depth. The height of 15.55 inches is low enough to fit under most cabinets. The included portafilter is commercial-grade 58mm, and the tamper has a weighty feel. The steam wand is articulating and covered with a rubber grip to prevent burns. Overall, the build quality aligns with machines in this price segment, though the vibratory pump is a step below rotary pumps found in fully prosumer machines.

Shot Quality

The PID control enables precise temperature stability once dialed in, though initial setup requires experimenting with settings for different beans. The heat exchanger design means the boiler temperature will be higher than brew temperature, requiring a cooling flush before pulling a shot. Many users find this routine easy after practice. The E61 grouphead maintains heat well, and the adjustable preinfusion helps reduce channeling. The vibratory pump delivers 15 bars of pressure, consistent with most home machines, but it is not silent — expect a humming sound during operation. Steam performance is strong: the 3-hole tip creates microfoam quickly, and because the heat exchanger is always ready, there is no wait for steam recovery between milk drinks.

The shot timer integrated into the display helps replicate successful recipes. The machine lacks a pressure gauge on the brew group (only a pump pressure gauge), which some users might miss for fine-tuning. Overall, shot quality is very good for the price, with the ability to produce espresso that competes with machines costing more. However, the vibratory pump may not be ideal for back-to-back shots in a high-volume setting, as it can overheat with prolonged use. For home use typical of 2-4 shots per session, this is unlikely to be an issue.